Hansgrohe has been producing faucets and bathroom accessories since 1901. Along the way, the company has pioneered such innovations as the first adjustable hand shower, mixer taps first coordinated colors, and the first shower wall sprays adjustable. Although it sounds complicated, installing a hansgrohe bathroom faucets it is really no different than installing any other accessory kitchen. Remove the faucet Hansgrohe packaging. Loosen the mounting nut on the bottom and then slide the metal washer, fiber washer and spacer.
Apply a thin layer of plumber’s putty on the bottom of the key, the back of the sealing ring. Put below where you are installing the hansgrohe bathroom faucets. Tighten the mounting nut at the bottom of the hose. Insert the two screws to secure the mounting nut in place and secure with the screwdriver. Connect the connecting hose to the hose from the tap.
Wrap the ends of the outlet valves for water supply pipe tape. You pass couplings hose connector outlets – joins the hot and one cold grants. Use two keys – one to hold the connection nut in place while tightening the other – to avoid twisting the lines. Open the water supply. Run the hansgrohe bathroom faucets and check for leaks.