How to Use Outdoor Motion Sensor Light

Outdoor Motion Sensor Light Wall
Outdoor Motion Sensor Light Wall
Nov 19th

Outdoor motion sensor light – If you have an outdoor light that is controlled by a switch, you may want that light must be activated by a motion detector. In this way, the light will come when he is needed the most – when someone moves outside in the dark. You will need to decide what type of motion detector to buy because they are available in varying degrees of sensitivity. Installation is not difficult, since you can use the box and the son who supply electricity to the existing light.

Outdoor motion sensor light, turn off the power switch of the external light. Remove the bulb if necessary. Unscrew the bolts that hold the light to the existing electrical box. Undo the nuts that connect the electrical son in the light, noting how each wire is connected. Set the old light and side mounting screws.

Outdoor motion sensor light fit a new electrical box 6 to 12 inches off the existing electrical box, securing it to the wall with screws. Cut a length of wire 12/2 gauge, about 12 inches longer than the distance from box to box. Strip about 5 inches of the plastic protection on the outside of both ends of 12/2 gauge wire. Strip about 3/4 inch of insulation from both white and black son, the two ends of 12/2 wire.

12 Photos Gallery of: How to Use Outdoor Motion Sensor Light

Image of: Outdoor Motion Sensor Light Wall
Image of: Outdoor Motion Sensor Light Plan
Image of: Outdoor Motion Sensor Light Inspired
Image of: Outdoor Motion Sensor Light Ideas
Image of: Outdoor Motion Sensor Light Design
Image of: Outdoor Motion Sensor Light Decorative
Image of: Modern Outdoor Motion Sensor Light
Image of: LED Outdoor Motion Sensor Light
Image of: Contemporary Outdoor Motion Sensor Light
Image of: Black Outdoor Motion Sensor Light
Image of: Best Outdoor Motion Sensor Light
Image of: Amazing Outdoor Motion Sensor Light
 

You Might Also Like Another Post Under: Lighting Design